Incazelo
Vehicle Fitment & Part Details
This front left or right driveshaft is listed for the Toyota Land Cruiser Prado 2.7 3RZFE (1995–2002). 30×27×620 mm. Confirm compatibility by matching the listed fitment details and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- DTO660
- Component
- Driveshaft
- Position
- Front Left or Right
- Primary Fitment
- Toyota Land Cruiser Prado 2.7 3RZFE 110 kW (1995–2002)
- Specs
- 30×27×620 mm
Product Specifications
| Specification | Details |
|---|---|
| Dimensions | 30×27×620 mm |
Vehicle Fitment
| Model | Chassis | Years | Engine | Power | Engine Code |
|---|---|---|---|---|---|
| Land Cruiser Prado | 1995–2002 | 2.7 | 110 kW | 3RZFE | |
| Land Cruiser Prado | 1995–2003 | 3.4 | 131 kW | 5VZFE | |
| Land Cruiser Prado | 1995–2003 | 2.7 | 110 kW | 3RZFE | |
| Land Cruiser Prado | 1996–2000 | 3.0 TD | 92 kW | 1KZTE | |
| Land Cruiser Prado | 1996–2002 | 3.4 | 131 kW | 5VZFE | |
| Land Cruiser Prado | 2002–2007 | 3.0 D4d | 120 kW | 1KDFTV | |
| Hilux | MK VI | 1995–2000 | 2.7 | 107 kW | 3RZFE |
| Hilux | MK VI | 1995–2000 | 2.7 | 108 kW | 3RZFE |
Fitment Notes
- Always match vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
Important: With CV joints and driveshafts, a VIN check can still return multiple possible variants within the same model range. First confirm whether you need an inner CV joint, outer CV joint, CV boot, or complete driveshaft. Then match the removed unit by outer spline count, inner spline count, seal size (mm), outer diameter (mm), groove position, overall length (mm), and ABS ring tooth count where applicable. The only reliable way to confirm the correct part is to physically inspect and measure the old unit and match these specifications before ordering.
Returns Notice: CV joints, driveshafts, and boots that are greasy or incomplete are not returnable.
Installation / Use / Maintenance Tips
- Compare the new driveshaft to the removed unit before installation to confirm spline count, length, and size details match.
- Clean mounting surfaces and check related seals or boots before fitting the new part.
- Replace related clips, circlips, or one-time-use hardware where applicable.
- Follow the vehicle manufacturer’s workshop procedure during installation.
- After installation, check for correct operation, abnormal noise, or vibration as applicable.
Common Questions
Will this front left or right driveshaft fit my Toyota Land Cruiser Prado?
This part (DTO660) is listed for the fitments shown on this page. Confirm by matching the fitment details and verifying VIN/engine/chassis information where variants exist.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.
Important: Product information, kit contents and compatibility are provided as a guide and may contain errors or omissions. Please verify that this part and any included components are correct for your vehicle before installation. For full details see our Website Disclaimer (Errors & Omissions).