Incazelo
Vehicle Fitment & Part Details
This fuel rail pressure sensor (MAP-101010, OE BK2Q-9D280-AB) fits the Ford Ranger T6, Transit (2006-2018), Transit Custom V362, Transit V363, Tourneo Custom V362, and Peugeot Boxer across the 2.2 TDCi / 2.2 HDi diesel range. The sensor measures pressure inside the common rail and reports back to the ECU, and is located on the fuel rail. Confirm compatibility by matching the listed fitment details, OEM reference numbers, and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- MAP-101010
- Component
- Fuel Rail Pressure Sensor
- Fitting Position
- On the fuel rail
- OEM References
-
- Ford: BK2Q-9D280-AB
- BK2Q-9D280-BB
- 85PP40-02
- 55PP40-01
- 1717578
- Citroën / Peugeot: 9675389980
- Mazda: U213-13-150
Vehicle Fitment
Includes 50+ supplied 2.2 TDCi / HDi applications.
View Full Vehicle Fitment
| Make | Model | Variant | Engine Code | Power | Years |
|---|---|---|---|---|---|
| Ford | Ranger (TKE) | 2.2 TDCi 4x2 / 4x4 | ENPF, GBVAJPF | 88 kW / 120 PS | 04/2011- |
| Ford | Ranger (TKE) | 2.2 TDCi 4x2 / 4x4 | ENQW, GBVAJQW | 92 kW / 125 PS | 04/2011- |
| Ford | Ranger (TKE) | 2.2 TDCi 4x2 / 4x4 | T22DD0P | 96 kW / 131 PS | 05/2015- |
| Ford | Ranger (TKE) | 2.2 TDCi 4x2 / 4x4 | GBVAJQJ, ENQJ | 110 kW / 150 PS | 04/2011- |
| Ford | Ranger (TKE) | 2.2 TDCi 4x2 / 4x4 | GBVAJQJ, T22DD0P | 118 kW / 160 PS | 05/2015- |
| Ford | Ranger (TKE) | 3.2 TDCi 4x4 | SA2S, SA2W, ENSA, SAFA, P5-AT, SA2R | 147 kW / 200 PS | 04/2011- |
| Ford | Transit (Bus / Van / Platform 06-14) | 2.2 TDCi | P8FA, P8FB | 63 kW / 85 PS | 04/2006-08/2014 |
| Ford | Transit | 2.2 TDCi | QVFA | 81 kW / 110 PS | 04/2006-08/2014 |
| Ford | Transit | 2.2 TDCi | SRFA, SRFB, SRFC, SRFD, SRFE | 85 kW / 115 PS | 10/2008-08/2014 |
| Ford | Transit | 2.2 TDCi | QWFA | 96 kW / 130 PS | 04/2006-08/2014 |
| Ford | Transit | 2.2 TDCi | UHFA, UHFB, UHFC, PGFA, PGFB | 103 kW / 140 PS | 10/2007-08/2014 |
| Ford | Transit (11-14) | 2.2 TDCi / RWD | DRFA-E, DRRA-C | 74 kW / 100 PS | 10/2011-08/2014 |
| Ford | Transit (11-14) | 2.2 TDCi / RWD / 4x4 | CYFD, CYFA-C, CYRA, CYRB, CYRC | 92 kW / 125 PS | 09/2011-12/2014 |
| Ford | Transit (11-14) | 2.2 TDCi RWD | USRA, USRB | 100 kW / 135 PS | 09/2011-08/2014 |
| Ford | Transit (11-14) | 2.2 TDCi RWD | CVRA, CVRB, CVRC | 114 kW / 155 PS | 10/2011-08/2014 |
| Ford | Transit Custom V362 (Van / Bus) | 2.2 TDCi | DRFG, DRFF, DRF4 | 74 kW / 100 PS | 09/2012-06/2016 |
| Ford | Transit Custom V362 (Van / Bus) | 2.2 TDCi | CYFF, CYF4 | 92 kW / 125 PS | 09/2012-12/2023 |
| Ford | Transit Custom V362 | 2.2 TDCi | CVFF | 114 kW / 155 PS | 09/2012-12/2015 |
| Ford | Tourneo Custom V362 Bus | 2.2 TDCi | DRFG, DRFF, DRF4 / CYFF, CYF4 / CVFF | 74-114 kW | 09/2012-12/2015 |
| Ford | Transit V363 (Bus / Van / Chassis) | 2.2 TDCi / RWD / 4x4 / AWD | DRF5, DRFG, DRFF, DRR5, CYF5, CYFG, CY14, USF6, USR6, CYR5, CY24, CVF5, CVR5, UYR6, CV24, UHR5 | 74-114 kW | 08/2013-12/2018 |
| Peugeot | Boxer Bus | 2.2 HDi 110 | 4HG (P22DTE) | 81 kW / 110 PS | 03/2011-12/2020 |
| Peugeot | Boxer Bus | 2.2 HDi 130 | 4HH (P22DTE) | 96 kW / 131 PS | 03/2011- |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
- This sensor is fitted to the high-pressure fuel rail - confirm the physical layout and connector on your vehicle matches before ordering.
Important - Fuel System Installation
- Work in a well-ventilated area, away from ignition sources, with the battery disconnected.
- Cleanliness is critical when opening a high-pressure diesel system. Any debris entering the rail can cause injector or pump failure.
- Allow the engine to stand and rail pressure to bleed down before removing the sensor - do not remove while under pressure.
- Inspect fuel quality and the filter at the same time - contaminated fuel is a common cause of sensor failure.
Installation / Use / Maintenance Tips
- Depressurise the fuel system and allow rail pressure to bleed down before removing the sensor.
- Do not overtighten - torque to the manufacturer's specification using a torque wrench.
- Handle the sensor carefully - do not knock or drop it, as internal damage will cause incorrect readings.
- After installation, clear stored fault codes, verify live data shows correct rail pressure, and confirm stable idle and throttle response.
Common Questions
Will this fuel rail pressure sensor fit my Ford or Peugeot?
This part (MAP-101010) is listed for the fitments shown on this page. Confirm by matching the OE number on the fuel rail and your VIN/engine code before ordering.
Where is the sensor located?
This sensor is fitted to the high-pressure fuel rail on the engine.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the Key Details section above. Match at least one to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.
Important: Product information, kit contents and compatibility are provided as a guide and may contain errors or omissions. Please verify that this part and any included components are correct for your vehicle before installation. For full details see our Website Disclaimer (Errors & Omissions).