Incazelo
Vehicle Fitment & Part Details
This front driveshaft is listed for the Renault Kwid 1.0 SCe (B4D). This listing covers both left and right positions — select the correct side for your vehicle using the comparison table below. Confirm compatibility by matching the listed fitment details and VIN/engine/chassis information where variants exist.
SKU Comparison — Select Left or Right
| Compare By | DRN204 | DRN205 |
|---|---|---|
| Position | Front Right | Front Left |
| Vehicle Fitment | Renault Kwid 1.0 SCe (B4D) 2016– | Renault Kwid 1.0 SCe (B4D) 2016– |
| Transmission | Manual 5-speed / Automatic 5-speed | Manual 5-speed / Automatic 5-speed |
Select the correct side: DRN204 is the front right driveshaft; DRN205 is the front left driveshaft. On SA right-hand-drive vehicles, front right is the offside (driver) and front left is the nearside (passenger) position. Match to the removed unit before ordering.
Key Details
- SKU (Right)
- DRN204
- SKU (Left)
- DRN205
- Component
- Driveshaft
- Position
- Front Right (DRN204) / Front Left (DRN205)
- Primary Fitment
- Renault Kwid 1.0 SCe (B4D) Hatchback (2016–)
- Transmission
- Manual 5-speed and Automatic 5-speed
Key Benefits
- Both left and right driveshafts available on a single listing — select the correct side using the comparison table above.
- Listed for both manual 5-speed and automatic 5-speed Renault Kwid 1.0 SCe (B4D) applications.
Vehicle Fitment
| Make | Model | Variant | Engine | Transmission | Years |
|---|---|---|---|---|---|
| Renault | Kwid Hatchback | 1.0 SCe 50 | B4D 404 | Manual 5-speed | 2016– |
| Renault | Kwid Hatchback | 1.0 SCe 50 | B4D 404 | Automatic 5-speed | 2016– |
Fitment Notes
- Always match vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
- This listing covers both front left and front right — select the correct side. On SA right-hand-drive vehicles: front left = nearside (passenger), front right = offside (driver).
Important: With CV joints and driveshafts, a VIN check can still return multiple possible variants within the same model range. First confirm whether you need a left or right driveshaft. Then match the removed unit by overall length, outer spline count, inner spline count, ABS ring tooth count, and joint type where applicable. The only reliable way to confirm the correct part is to physically inspect and measure the old unit and match these specifications before ordering.
Returns Notice: CV joints, driveshafts, and boots that are greasy or incomplete are not returnable.
Installation / Use / Maintenance Tips
- Compare the new driveshaft to the removed unit — match overall length, spline counts, ABS ring (if fitted), and joint types before fitting.
- Inspect related CV boots, hub bearings, transmission seals, and suspension components before fitting the new driveshaft.
- Use a new hub nut and circlip where specified by the workshop procedure — do not reuse one-time-use fasteners.
- Follow the Renault workshop procedure for correct installation sequence and torque specifications.
- After installation, check for correct operation, abnormal noise, and confirm CV boot clamps are secure.
Common Questions
How do I know if I need the left or right driveshaft?
On SA right-hand-drive Renault Kwid vehicles, front right (DRN204) is the driver (offside) and front left (DRN205) is the passenger (nearside). Match to the removed unit's position before ordering.
Does this fit both manual and automatic Kwid?
Yes, both manual 5-speed and automatic 5-speed Renault Kwid 1.0 SCe (B4D) applications are listed.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. Physically measure the removed driveshaft and match specs before ordering. If unsure, request fitment assistance before ordering.
Important: Product information, kit contents and compatibility are provided as a guide and may contain errors or omissions. Please verify that this part and any included components are correct for your vehicle before installation. For full details see our Website Disclaimer (Errors & Omissions).