Description
Vehicle Fitment & Part Details
This outer CV joint fits the Nissan Qashqai II (J11) 1.6 dCi R9M (2014–2018), available in both 4x2 and 4x4 configurations. Also compatible with the Renault Kadjar and Nissan X-Trail III (T32). Confirm compatibility by matching the listed fitment details and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- PJ801974
- Component
- Outer CV Joint
- Position
- Front Axle
- Brand
- Partquip
- Primary Fitment
- Nissan Qashqai II (J11) 1.6 dCi R9M (2014–2018)
- Specs
- 29 outer splines, 28 inner splines, 62 mm seal diameter, 170 mm length, M24x1.5 thread
Product Specifications
| Specification | Value |
|---|---|
| Internal Toothing (Wheel Side) | 28 |
| External Toothing (Differential Side) | 29 |
| Seal Ring Diameter | 62 mm |
| Length | 170 mm |
| Thread Size | M24 x 1.5 |
Vehicle Fitment
| Make | Model | Chassis | Engine | Years | Power |
|---|---|---|---|---|---|
| Nissan | Qashqai II | J11 | 1.6 dCi R9M | 2014–2018 | 96kW / 130PS |
| Nissan | Qashqai II | J11 | 1.6 dCi ALL MODE 4x4-i R9M | 2016–2018 | 96kW / 130PS |
| Nissan | X-Trail III | T32 (NT32) | 1.6 dCi ALL MODE 4x4-i R9M | 2014– | 96kW / 130PS |
| Renault | Kadjar | HA / HL (HLA4) | 1.6 dCi 130 R9M 414 | 2015– | 96kW / 130PS |
| Renault | Kadjar | HA / HL (HLA4) | 1.6 dCi 130 4x4 R9M 414 | 2015– | 96kW / 130PS |
Fitment Notes
- Always match vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
Important: With CV joints and driveshafts, a VIN check can still return multiple possible variants within the same model range. First confirm whether you need an inner CV joint, outer CV joint, CV boot, or complete driveshaft. Then match the removed unit by outer spline count, inner spline count, seal size (mm), outer diameter (mm), groove position, overall length (mm), and ABS ring tooth count where applicable. The only reliable way to confirm the correct part is to physically inspect and measure the old unit and match these specifications before ordering.
Returns Notice: CV joints, driveshafts, and boots that are greasy or incomplete are not returnable.
Installation / Use / Maintenance Tips
- Compare the new outer CV joint to the removed unit before installation to confirm spline count, seal diameter, thread size, and overall length match.
- Clean the hub splines and driveshaft connection before fitting the new joint.
- Use fresh CV joint grease and a new boot or boot kit during reassembly.
- Follow the vehicle manufacturer’s workshop procedure during installation.
- After installation, check for abnormal noise, vibration, or grease leaks during a test drive.
Common Questions
Will this outer CV joint fit my Nissan Qashqai?
This part (PJ801974) is listed for the fitments shown on this page. Confirm by matching the fitment details and verifying VIN/engine/chassis information where variants exist.
What brand is this part?
This listing is for Partquip outer CV joint.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.
Important: Product information, kit contents and compatibility are provided as a guide and may contain errors or omissions. Please verify that this part and any included components are correct for your vehicle before installation. For full details see our Website Disclaimer (Errors & Omissions).