Description
Vehicle Fitment & Part Details
This front right drive shaft (DJE101) is listed for the Jeep Patriot 2.4 VVT ED3 (2007–2017) with 28 spline × 28 spline and 680–735 mm overall length. Confirm compatibility by matching the listed fitment details and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- DJE101
- Component
- Drive Shaft
- Position
- Front Right
- Primary Fitment
- Jeep Patriot 2.4 VVT ED3, EDG (2007–2017)
- Specs
- 28 spline × 28 spline, 680–735 mm
Product Specifications
| Specification | Value |
|---|---|
| Inner Spline Count | 28 |
| Outer Spline Count | 28 |
| Overall Length | 680–735 mm |
Vehicle Fitment
| Model | Engine | Power (kW) | Years |
|---|---|---|---|
| Patriot 2.4 VVT | ED3, EDG | 125 | 2007–2017 |
| Patriot 2.0 CRD | ECD, ECE | 103 | 2007–2017 |
Fitment Notes
- Always match vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
Important: With CV joints and driveshafts, a VIN check can still return multiple possible variants within the same model range. First confirm whether you need an inner CV joint, outer CV joint, CV boot, or complete driveshaft. Then match the removed unit by outer spline count, inner spline count, seal size (mm), outer diameter (mm), groove position, overall length (mm), and ABS ring tooth count where applicable. The only reliable way to confirm the correct part is to physically inspect and measure the old unit and match these specifications before ordering.
Returns Notice: CV joints, driveshafts, and boots that are greasy or incomplete are not returnable.
Installation / Use / Maintenance Tips
- Compare the new drive shaft to the removed unit before fitting to confirm spline counts, overall length, and joint types match.
- Inspect related arms, links, boots, and mounting hardware before fitting the new part.
- Clean mounting surfaces and use the correct orientation during assembly.
- Replace one-time-use nuts, clips, or retainers where applicable.
- Check wheel alignment after installation where suspension or steering geometry may be affected.
Common Questions
Will this front right drive shaft fit my Jeep Patriot?
This part (DJE101) is listed for the fitments shown on this page. Confirm by matching the fitment details, spline counts, and overall length, and verify VIN/engine/chassis information where variants exist.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. Physically measure spline counts and overall length on the removed unit before ordering. If unsure, request fitment assistance before ordering.
Important: Product information, kit contents and compatibility are provided as a guide and may contain errors or omissions. Please verify that this part and any included components are correct for your vehicle before installation. For full details see our Website Disclaimer (Errors & Omissions).