Description
Vehicle Fitment & Part Details
This rear hub bearing is listed for the Mazda 2 (DL, DJ) with OE reference DA7H-26-15X. Bearing kit with 4 stud bolts and ABS ring, 75 mm outer diameter, 60.3 mm width. Confirm compatibility by matching the listed fitment details, OEM reference numbers, and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- PQ1088 / 9400447
- Component
- Hub Bearing
- Position
- Rear
- Primary Fitment
- Mazda 2 (DL, DJ) P5Y5 Petrol 1.5 (2014-)
- Specs
- Bearing kit, 4-stud, 75 mm OD, 60.3 mm width, 100 mm bolt hole circle, with ABS
Key Benefits
- Cross-references 5 Mazda OEM numbers including DA7H-26-15X, DA7H-26-15XA, and D09H-26-15X for verification before ordering.
- Bearing kit with 4 stud bolts and ABS ring for direct rear axle replacement.
OEM Reference Numbers
- Mazda: D09H-26-15X, DA7H-26-15X, DA7H-26-15XA, DA7H-26-15XB, DA7H-26-15XC
Product Specifications
| Specification | Value |
|---|---|
| Type | Bearing Kit |
| Number of Stud Bolts | 4 |
| Outer Diameter | 75 mm |
| Outer Diameter (overall) | 122 mm |
| Inner Diameter | 55 mm |
| Width | 60.3 mm |
| Bolt Hole Circle | 100 mm |
| ABS | With ABS |
Vehicle Fitment
| Model | Chassis | Variant | Engine Code(s) | Power | Years |
|---|---|---|---|---|---|
| Mazda 2 Hatchback | DL, DJ | 1.5 Skyactiv-G (DJLFS) | P5Y5; P5-VPS; P5X0; P5X2; P5Z7; P5Z8; P5Z9; P5Z3 | 85kW/115PS | 2014- |
| Mazda 2 Hatchback | DL, DJ | 1.5 | P5Z9; P5Y5; P5Y8; P5X0; P5X2; P5Z7; P5Z8 | 55kW/75PS | 2014- |
| Mazda 2 Hatchback | DL, DJ | 1.5 Skyactiv-G | P5Y5; P5Y8; P5X0; P5Y6; P5X2; P5Z7; P5Z8; P5Z9; P5Z2; P5Z3 | 66kW/90PS | 2014- |
| Mazda 2 Hatchback | DL, DJ | 1.5 D (DJ5FS) | S5Y2; S5Y7; S5Y6; S5Y8; S5Y5; S5-DPTS; S5-DPTR | 77kW/105PS | 2014- |
| Mazda 2 Hatchback | DL, DJ | 1.5 Skyactiv-G M Hybrid | P5XC; P5XB | 66kW/90PS | 2019- |
| Mazda 2 Hatchback | DL, DJ | 1.5 Skyactiv-G M Hybrid | P5XC; P5XB | 55kW/75PS | 2019- |
| Mazda 2 Hatchback | DL, DJ | 1.5 (DJ2HA) | P5-VPS; P5Y6; P5Y4 | 79kW/107PS | 2014- |
| Mazda 2 Hatchback | DL, DJ | 1.5 e-Skyactiv G | P5X9; P5Z7; P5ZE | 85kW/116PS | 2021- |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
Installation / Use / Maintenance Tips
- Compare the new hub bearing to the removed unit before installation to confirm outer diameter, stud bolt count, bolt hole circle, and ABS ring configuration match.
- Clean the hub housing and mating surfaces before fitting the new bearing.
- Use new fasteners where specified and tighten to the vehicle manufacturer's torque values.
- After installation, check for abnormal noise, play, or ABS warning light activity during a test drive.
Common Questions
Will this rear hub bearing fit my Mazda 2?
This part (PQ1088) is listed for the fitments shown on this page. Confirm by matching the fitment details and verifying VIN/engine/chassis information where variants exist.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.