Description
Vehicle Fitment & Part Details
This Full Gasket Set is engineered for the Nissan YD25DDTi 2.5-litre four-cylinder turbodiesel engine, covering the Navara (D23, D23T and D40), NP300 Hardbody (D22), Pathfinder, NV350 Panelvan and Serena. One of Nissan’s most widely used diesel platforms in Southern Africa, the YD25DDTi spans nearly two decades of production. Manufactured by Partquip to OE-matching specifications.
- SKU
- PQFG034
- Component
- Full Gasket Set
- Brand
- Partquip
- OEM References
- 10101-BN027
- Primary Fitment
- Nissan Navara 2.5 TDi YD25DDTi
OEM Reference Numbers
- Nissan 10101-BN027
Vehicle Fitment
| Make | Model | Engine | Years | Notes |
|---|---|---|---|---|
| Nissan | Serena 2.5 KH-VN | 2.5 YD25DDTi | 1999–2005 | Bore 89.00 mm |
| Nissan | Navara [D40] 2.5 dCi | 2.5 YD25DDTi | 2005–2017 | Bore 89.00 mm |
| Nissan | Navara [D40] 2.5 dCi | 2.5 YD25DDTi | 2005–2017 | Bore 89.00 mm |
| Nissan | Navara [D40] 2.5 dCi | 2.5 YD25DDTi | 2009– | Bore 89.00 mm |
| Nissan | NP300 2.5 TDi Hardbody | 2.5 YD25DDTi | 2009– | Bore 89.00 mm |
| Nissan | NP300 2.5 TDi W/House | 2.5 YD25DDTi | 2009– | Bore 89.00 mm |
| Nissan | NP300 2.5 TDi W/House | 2.5 YD25DDTi | 2009– | Bore 89.00 mm |
| Nissan | NV350 Panelvan 2.5 | 2.5 YD25DDTi | 2013– | Bore 89.00 mm |
| Nissan | Pathfinder 2.5 dCi | 2.5 YD25DDTi | 2005–2012 | Bore 89.00 mm |
| Nissan | Navara [D23] 2.5 dCi | 2.5 YD25DDTi | 2021– | Bore 89.00 mm |
| Nissan | Navara [D23] 2.5 dCi | 2.5 YD25DDTi | 2021– | Bore 89.00 mm |
| Nissan | Navara [D23] 2.5 dCi | 2.5 YD25DDTi | 2021– | Bore 89.00 mm |
| Nissan | Navara [D23] 2.5 dCi | 2.5 YD25DDTi | 2021– | Bore 89.00 mm |
All 13 applications share the Nissan YD25DDTi 2.5-litre four-cylinder turbodiesel engine with 89.00 mm bore. Multiple feed entries for the Navara D40, D23 and NP300 reflect different trim levels and drivetrain variants (4x2/4x4, Hardbody/Workhorse) — all use the identical YD25DDTi engine. Coverage spans from the 1999 Serena through to current-production Navara D23 models.
Full Gasket Sets are classified as engine-internal components. We strongly recommend that installation is carried out by a qualified, VAT-registered workshop. Incorrect fitment may result in serious engine damage. Once packaging has been opened or seals broken, this product cannot be returned under our returns policy. Please confirm the OEM part number and vehicle application before opening.
Installation Tips
- Clean all mating surfaces thoroughly, removing old gasket material and carbon deposits before fitting new gaskets.
- Check the cylinder head and block for warpage using a straight edge and feeler gauge; resurface if out of specification.
- Torque all fasteners to the vehicle manufacturer’s specifications using a calibrated torque wrench and the correct tightening sequence.
- Replace head bolts if the engine uses torque-to-yield (TTY) fasteners — these are designed for single use only.
- Allow silicone sealant (where specified) to cure fully before filling coolant or starting the engine.
Frequently Asked Questions
- What is included in a Full Gasket Set?
- A Full Gasket Set typically includes the head gasket, valve-cover gasket, intake and exhaust manifold gaskets, water-pump gasket, oil-pan gasket, and various seals and O-rings required for a complete engine reseal.
- How do I confirm this set fits my vehicle?
- Match the OEM reference number (10101-BN027) against your vehicle’s service manual or existing part. Also verify the engine code (YD25DDTi) on your vehicle identification plate and confirm your chassis code (D23, D40 or D22).
- Can I install this myself?
- While mechanically experienced individuals can perform the work, we strongly recommend professional installation by a qualified workshop to ensure correct torque settings and gasket alignment.