Description
Vehicle Fitment & Part Details
This complete front suspension kit (MAPKit4) is listed for the Audi A4 B8 / B9 (2008-onward), covering 1.4 / 1.8 / 2.0 TFSI petrol, 2.0 / 3.0 TDI diesel, and RS4 / Allroad variants, with kit-level VAG OE reference 8K0407505A-P. The kit contains 13 components for a complete front-end rebuild including rack ends, tie rod ends, ball joints, upper and lower control arms, and stabiliser links. OEM-level quality, guaranteed for 12 months. Confirm compatibility by matching the listed OEM reference numbers, engine code, model year, and VIN/chassis information where variants exist.
Key Details
- SKU
- MAPKit4
- Component
- Front Suspension Kit
- Position
- Front Axle
- Configuration
- Kit (13 pieces)
- Quality
- OEM-level quality, 12-month guarantee
- Primary Fitment
- Audi A4 B8 / B9 (2008-onward)
Kit Component Breakdown
| Component | Qty | Position | Specs |
|---|---|---|---|
| Rack End | 2 | At Tie Rod | 243mm length, M16x1.5 / M16x1.5 |
| Tie Rod End Set | 1 set | Front Axle Outer | 206mm length, ball pin M12x1.5, housing M16x1.5, cone Ø14.7mm / Ø19mm |
| Ball Joint | 2 | Front Axle Lower | Cone 21.8mm / 13.8mm, M12x1.5 thread |
| Upper Control Arm (Front) | 2 | Front Axle Left & Right | 268mm length, ball pin Ø16, bush 40mm length, inner bush Ø10.2mm |
| Upper Control Arm (Rear) | 2 | Front Axle Left & Right | 235.6mm length, ball pin Ø16, bush 40mm length, inner bush Ø10.2mm |
| Lower Control Arm (Front) | 2 | Front Axle Left & Right | 360.7mm length, cone Ø13.8mm / Ø20.8mm, bush 54.9mm length, inner bush Ø12.2mm |
| Lower Control Arm (Rear) | 2 | Front Axle Left & Right | 420.7mm length, ball pin M14x1.5, cone Ø16.9mm / Ø21.5mm, bush 80mm length, inner bush Ø12.2mm |
| Stabiliser Link | 2 | Front Axle Left & Right | 170mm length, bush 32mm length, inner bush Ø10.9mm |
OEM Reference Numbers
Kit-level OEM reference: VAG 8K0407505A-P
This kit cross-references the following VAG component-level OEM numbers:
| Brand | OEM Numbers |
|---|---|
| VAG | 8K0407505A, 8K0407505AP, 8K0407505N, 8KD407505, 8K0407506A, 8K0407506N, 8KD407506, 8K0407509A, 8K0407509N, 8KD407509, 8K0407510A, 8K0407510N, 8KD407510, 8K0407151B, 8K0407151C, 8K0407151D, 8K0407152B, 8K0407152C, 8K0407152D, 8K0407693T, 8K0407694T, 8K0407689D, 8K0407689E, 8K0407689F, 8K0407689G, 8K0411317A, 8K0411317C, 8K0411317E, 4H0411317A, 4H0411317C, 8K0422817A, 8K0422817B, 8K0422818A, 8K0422818B, 4H0422810, 4H0422810A, 8J0423810 |
Vehicle Fitment
| Model | Variant | Engine Code | Years |
|---|---|---|---|
| Audi A4 | 1.4 TFSI | CVNA | 2015- |
| Audi A4 | 1.8 TFSI | CABB / CDHB | 2008-2012 |
| Audi A4 | 2.0 TDI | CAGB / CJCB | 2008-2012 |
| Audi A4 | 2.0 TDI | CAGA / CJCA | 2008-2015 |
| Audi A4 | 2.0 TDI | CAHA | 2008-2012 |
| Audi A4 Allroad | 2.0 TDI | CGLC | 2012-2016 |
| Audi A4 | 2.0 TDI | DESA / DETA | 2016- |
| Audi A4 | 2.0 TFSI | CAEA / CDNB | 2008-2012 |
| Audi A4 | 2.0 TFSI | CVKB / DBPA | 2015- |
| Audi A4 | 2.0 TFSI | CDNC / CAEB | 2008-2012 |
| Audi A4 | 2.0 TFSI | CNCD | 2013-2015 |
| Audi A4 Allroad | 2.0 TFSI | CNCD | 2013-2016 |
| Audi A4 | 3.0 TDI V6 | CCWA / CAPA | 2008-2012 |
| Audi A4 | 3.2 FSI Quattro V6 | CALA | 2008 |
| Audi A4 Avant RS4 Quattro | RS4 | CFSA | 2012-2015 |
Fitment Notes
- Always match OEM reference number(s), engine code, and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
- This kit covers the Audi A4 B8 / B9 platforms including saloon, Avant, Allroad, and RS4 variants from 2008 onward.
- OEM-level quality kit, guaranteed for 12 months from date of purchase.
Installation / Use / Maintenance Tips
- Support the front of the vehicle securely on jack stands and remove both front wheels before starting work.
- Label each arm position carefully during removal — this multi-link front end has distinct left/right and upper/lower arms.
- Inspect related bushes, ball joint boots, and mounting hardware before fitting the new components.
- Replace all arms at the same time for balanced handling and even tyre wear.
- Torque all fasteners to manufacturer specifications. A full four-wheel alignment is essential after fitting.
Common Questions
Will this front suspension kit fit my Audi A4?
This kit (MAPKit4) is listed for the fitments shown on this page. Confirm by matching the OEM reference numbers, engine code, model year, and verifying VIN/chassis information where variants exist.
How many pieces are in this kit?
13 components in total: 2 rack ends, a tie rod end set, 2 lower ball joints, 2 upper control arms (front position), 2 upper control arms (rear position), 2 lower control arms (front position), 2 lower control arms (rear position), and 2 stabiliser links.
What is the quality and warranty?
This kit is OEM-level quality and is guaranteed for 12 months from date of purchase, subject to correct installation by a qualified workshop and a full four-wheel alignment after fitting.
Does this fit the A4 Allroad and RS4 variants?
Yes — the kit covers the Audi A4 saloon, Avant, Allroad (2.0 TDI CGLC and 2.0 TFSI CNCD), and Avant RS4 Quattro (CFSA). Verify the engine code against your vehicle before ordering.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above (kit-level VAG 8K0407505A-P, plus 37 component-level VAG references). Match at least one to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and model year and compare to the fitment section above. If unsure, request fitment assistance before ordering.