Description
Vehicle Fitment & Part Details
This hydraulic cam follower (MAP-100241) is supplied for Land Rover Discovery Sport 2.2D with the 224DT diesel engine, with Land Rover OE reference LR004168. It is a 12mm outer diameter hydraulic lifter for both intake and exhaust valve positions. Confirm compatibility by matching the listed fitment details, the OEM reference numbers, and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- MAP-100241
- Component
- Hydraulic Cam Follower
- Position
- Intake & Exhaust
- Primary Fitment
- Land Rover Discovery Sport 2.2D 224DT (2014-)
- Specs
- 12mm outer diameter, hydraulic operating mode, sold individually
Key Benefits
- Cross-references OEM part numbers across Citroën, Fiat, Ford, Jaguar, Land Rover, and Toyota for ordering verification.
- 12mm outer diameter dimension stated for direct comparison against the original lifter.
- Suitable for both intake and exhaust valve positions on listed engines.
OEM Reference Numbers
- Citroën: 0942.86
- Citroën: 9831126880
- Fiat: 9659189980
- Ford: 1450604
- Ford: 2457376
- Ford: 6G9Q6500AA
- Jaguar: C2S46434
- Land Rover: LR004168
- Toyota: SU001-A3049
- Toyota: SU001-B2635
- Toyota: 13750-OR010
Product Specifications
| Specification | Value |
|---|---|
| Fitting Position | Intake Side, Exhaust Side |
| Operating Mode | Hydraulic |
| Outer Diameter | 12.00 mm |
| Quantity | 1 |
Vehicle Fitment
Includes 19 supplied applications.
| Make | Model | Engine | Years |
|---|---|---|---|
| Land Rover | Discovery Sport 2.2D | 224DT | 2014- |
| Land Rover | Discovery Sport | 224DT | 2015- |
| Land Rover | Range Rover Evoque 2.2 SD | 224DT | 2012- |
| Land Rover | Freelander II | 224DT | 2010-2015 |
| Land Rover | Freelander II | 224DT | 2006-2009 |
| Jaguar | XF (X250) 2.2D | 224DT | 2011-2015 |
| Ford | Focus II 2.0 TDCi | G6DA / G6DB | 2005-2011 |
| Ford | Fusion 2.0 TDCi | T8CC | 2015- |
| Ford | Kuga II 2.0 TDCi 4WD | T8MA / T8MB | 2014- |
| Jeep | Cherokee 2.8 CRD | ENS | 2008-2014 |
| Jeep | Wrangler 2.8 CRD | ENS | 2007- |
| Jeep | Wrangler 2.8 CRD | ENS | 2010- |
| Chrysler | Grand Voyager 2.8 CRD | ENS | 2008- |
| Dodge | Nitro 2.8 CRD SXT | ENR / ENS | 2006-2010 |
| Peugeot | 3008 2.0 HDi | DW10CTED4 | 2010- |
| Peugeot | 5008 2.0 HDi | DW10CTED4 | 2011- |
| Peugeot | 508 2.2 HDi | DW12C | 2010- |
| Mahindra | Genio 2.2 CRDe | DW12DD | 2011- |
| Mahindra | Scorpio 2.2 CRDe | DW12DD | 2013- |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
- Compare the supplied 12mm outer diameter against the original lifter before ordering.
- Sold individually. Lifters are normally replaced as a complete set, not individually.
Important: Engine components such as bearings, pistons, rings, valves, gaskets, and related parts must be installed only by a qualified, VAT-registered workshop using proper measuring and torque equipment. Ensure crankshaft journals are measured and polished, oil clearances verified, and assembly lube applied. Failures due to oil starvation, contamination, incorrect sizing, or improper torque are not manufacturing defects and are not covered under warranty. Always replace engine oil, filters, and gaskets during installation.
Engine Parts Return Policy Warning
Returns Policy Notice: Engine internal components (including bearings, pistons, rings, gaskets, valves, etc.) are non-returnable once the sealed packaging has been opened. Returns are only accepted if the incorrect part was supplied and the item remains sealed, unused, and in original condition. Opened, fitted, dirty, or marked parts cannot be resold and are not eligible for refund or exchange. Please verify engine code, bore/size, and bearing grade before opening any packaging.
Installation / Use / Maintenance Tips
- Replace cam followers as a complete set, not individually, to maintain even valvetrain wear.
- Pre-soak hydraulic lifters in clean engine oil before fitting to bleed out air.
- Clean lifter bores in the head thoroughly before installing the new lifters.
- Inspect the camshaft lobes for wear or pitting and replace if damaged.
- Refill with fresh engine oil and filter, and allow the engine to idle gently on first start to let lifters bleed up before revving.
Common Questions
Will this hydraulic cam follower fit my Land Rover Discovery Sport?
This part (MAP-100241) is listed for the fitments shown on this page. Confirm by matching the fitment details and verifying VIN/engine/chassis information where variants exist.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Compare the supplied 12mm outer diameter against your old lifter and use the engine code (224DT, ENS, DW10CTED4, DW12C, DW12DD, G6DA, T8MA) to cross-check. If unsure, request fitment assistance before ordering.