Description
Vehicle Fitment & Part Details
The Crankshaft Position Sensor is listed for the vehicle applications below. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
Key Details
- SKU
- 177022
- Component
- Crankshaft Position Sensor
- Primary Fitment
- Audi A4 / S4 B6 8E2 (2001-2005)
- Specs
- Pins: 3-pin
Listing Highlights
- Listed for 23 applications shown in the fitment section.
- Supplied product specifications are listed for comparison with the original part.
Product Specifications
| Specification | Value |
|---|---|
| Pins | 3-pin |
Vehicle Fitment
This crankshaft position sensor is listed for 23 applications across Audi, Volkswagen. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
| Make | Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|---|
| Audi | A4 / S4 B6 | 8E2 | 2001-2005 | 1.8 T (BEX) | 140 kW / 190 HP |
| Audi | A4 / S4 B6 | 8E2 | 2001-2005 | 1.8 T (BFB) | 120 kW / 163 HP |
| Audi | A4 / S4 B6 | 8E2 | 2001-2005 | 2.0 (ALT) | 96 kW / 130 HP |
| Audi | A4 / S4 B6 | 8E2 | 2001-2005 | 2.5 TDI quattro (AKE, BAU, BDH) | 132 kW / 180 HP |
| Audi | A4 / S4 B6 Avant | 8E5 | 2002-2005 | 1.8 T (BEX) | 140 kW / 190 HP |
| Audi | A4 / S4 B6 Avant | 8E5 | 2002-2005 | 1.8 T (BFB) | 120 kW / 163 HP |
| Audi | A4 / S4 B6 Avant | 8E5 | 2002-2005 | 2.5 TDI quattro (AKE, BAU, BDH) | 132 kW / 180 HP |
| Audi | A4 / S4 B7 | 8EC | 2005-2009 | 1.8 T (BFB) | 120 kW / 163 HP |
| Audi | A4 / S4 B7 | 8EC | 2005-2009 | 2.0 (ALT) | 96 kW / 130 HP |
| Audi | A4 / S4 B7 Avant | 8ED | 2005-2008 | 1.8 T (BFB) | 120 kW / 163 HP |
| Audi | A4 / S4 B7 Avant | 8ED | 2005-2008 | 2.0 (ALT) | 96 kW / 130 HP |
| Audi | A4 B5 | 8D2 | 1995-2001 | 1.8 T (AEB, ANB, APU, ARK, AWT) | 110 kW / 150 HP |
| Audi | A4 B5 | 8D2 | 1995-2001 | 2.5 TDI (AFB, AKN) | 110 kW / 150 HP |
| Audi | A4 B5 Avant | 8D5 | 1997-2001 | 1.8 T (AEB, ANB, APU, ARK, AWT) | 110 kW / 150 HP |
| Audi | A6 / S6 C5 | 4B2, 4B4 | 1997-2004 | 1.8 T (AEB, ANB, APU, ARK, AWT) | 110 kW / 150 HP |
| Audi | A6 / S6 C5 | 4B2, 4B4 | 1997-2004 | 2.5 TDI (BCZ, BDG, BFC) | 120 kW / 163 HP |
| Audi | A6 / S6 C5 Avant | 4B5, 4B6 | 1998-2006 | 2.5 TDI (BCZ, BDG, BFC) | 120 kW / 163 HP |
| Audi | A6 / S6 C5 Avant | 4B5, 4B6 | 1998-2006 | 2.5 TDI Allroad quattro (AKE, BAU, BDH) | 132 kW / 180 HP |
| Audi | A6 / S6 C6 | 4F2 | 2004-2011 | 2.7 TDI (BPP) | 132 kW / 180 HP |
| Volkswagen | GOLF IV | 1J1 | 1997-2007 | 2.3 V5 (AGZ) | 110 kW / 150 HP |
| Volkswagen | JETTA IV | 1J2, 9M2 | 1999-2006 | 2.3 V5 (AGZ) | 110 kW / 150 HP |
| Volkswagen | PASSAT B5.5 | 3B3 | 2000-2005 | 1.8 T 20V (AWT) | 110 kW / 150 HP |
| Volkswagen | PASSAT B5.5 | 3B3 | 2000-2005 | 2.3 V5 (AZX) | 125 kW / 170 HP |
Fitment Notes
- Always match vehicle details before ordering. Verify VIN/engine.
Professional Fitment Required: Electronic, electrical, and electromechanical components require correct identification before installation. Compare the new unit to the removed unit and verify mounting orientation, terminal or connector type, pin count or terminal arrangement, voltage rating, polarity, and any pulley or bracket configuration where applicable. Incorrect installation, polarity reversal, water or moisture ingress, improper connector seating, or mismatched specifications can damage the component, related ECU systems, or cause persistent fault codes. Installation by a qualified, VAT-registered workshop with appropriate diagnostic equipment is recommended.
Returns Notice: Once an electronic, electrical, or electromechanical component has been fitted, plugged in, energised, or shows signs of installation, returns are limited to manufacturing defect only. Confirm part compatibility before opening sealed packaging.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering.
- Match the supplied fitment details to your vehicle, including model, year range and any listed engine or chassis information.
- Fitment data may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this crankshaft position sensor fit my Audi A4 / S4 B6 8E2?
This part (177022) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, OE reference numbers, original part details and any listed variant information before ordering. Verify VIN/engine.